BRIJ NEDAN 2.0

When launched, the Brij Nedan 2.0 challenged the traditional ways of isolation and decoupling.

​

Reducing the 'connection' between equipment and its environment by hanging components from fine thread like materials, was an idea that we had been developing for many years but there were numerous technical challenges in trying to minimise the connection to an absolute minimum.

​

Our mission was to create something that was strong enough to cope with heavy components and address the issue of 'decoupling' in a truly innovative way and our proprietary ISOL-X technology was born and laid the foundations for the BRIJ NEDAN.

​

The technology uses a woven hybrid material that exhibits exceptional acoustic dampening with a super low cross sectional area which is an unparalleled combination, unlike steel wire that can ring and transmit high levels of energy.

 

The BRIJ is perfect for audio specific racks and furniture where the width of the rack is limited, it incorporates our incredible ISOL-X hanger technology which decouples the platform from its surroundings. More details of our innovative technology can be found here ​'Tech Info'​​

​

The combination of our unique 'CircSink' footbeds and Sorbothane hemispheres, provide a firm foundation which is extremely effective at dissipating energy, allowing your equipment to perform to its full potential, reducing distortion and smearing of your music.

​

Many hundreds of hours have gone into making the Brij Nedan 2.0 the ultimate isolation platform and some design features are more than just skin deep. For instance, the cut outs on each face of the top plater aren't simply down to improving the aesthetics, these allow clearance for fingers when lowering equipment onto the platform, making placement much easier and safer.

 

 

IMPORTANT - The maximum loading capacity is 25kg of even weight distribution across the suspended platter so should easily accept most turntables, CD players and some valve amplifiers but please check carefully the weight of your equipment and how evenly the weight is distributed before mounting. If in doubt please get in touch and we will be happy to advise.